In electromagnetics, the antenna factor (units: m−1, reciprocal meter) is defined as the ratio of the electric field E (units: V/m or μV/m) to the voltage V (units: V or μV) induced across the terminals of an antenna. For an electric field antenna, the resulting antenna factor AF is: If all quantities are expressed logarithmically in decibels instead of SI units, the above equation becomes The voltage measured at the output terminals of an antenna is not the actual field intensity due to actual antenna gain, aperture characteristics, and loading effects. Where
Attributes | Values |
---|
rdfs:label
| - Antennenfaktor (de)
- Antenna factor (en)
|
rdfs:comment
| - In electromagnetics, the antenna factor (units: m−1, reciprocal meter) is defined as the ratio of the electric field E (units: V/m or μV/m) to the voltage V (units: V or μV) induced across the terminals of an antenna. For an electric field antenna, the resulting antenna factor AF is: If all quantities are expressed logarithmically in decibels instead of SI units, the above equation becomes The voltage measured at the output terminals of an antenna is not the actual field intensity due to actual antenna gain, aperture characteristics, and loading effects. Where (en)
- Der Antennenfaktor, abgekürzt AF oder auch als K-Faktor bezeichnet, drückt das Verhältnis der an einer Empfangsantenne anstehenden elektrischen Feldstärke E und der am abgeschlossenen Antennenanschluss anliegenden elektrischen Spannung U aus und charakterisiert die Empfangseigenschaften einer elektrischen Antenne. Bei magnetischen Antennen ergibt sich ein analoger Zusammenhang zwischen der magnetischen Feldstärke H und der am abgeschlossenen Antennenanschluss anliegenden elektrischen Spannung U. Der Antennenfaktor ist dabei stark frequenzabhängig, wird in Form von Diagrammen als Verlauf des Antennenfaktors über die Frequenz beschrieben, und ist vom Typ und Aufbau der Antenne bestimmt. (de)
|
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
Link from a Wikipage to an external page
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
has abstract
| - In electromagnetics, the antenna factor (units: m−1, reciprocal meter) is defined as the ratio of the electric field E (units: V/m or μV/m) to the voltage V (units: V or μV) induced across the terminals of an antenna. For an electric field antenna, the resulting antenna factor AF is: If all quantities are expressed logarithmically in decibels instead of SI units, the above equation becomes The voltage measured at the output terminals of an antenna is not the actual field intensity due to actual antenna gain, aperture characteristics, and loading effects. For a magnetic field antenna, the field is in units of A/m and the resulting antenna factor is in units of A/(Vm). For the relationship between the electric and magnetic fields, see the impedance of free space. For a 50 Ω load, knowing that PD Ae = Pr = V2/R and E2= PD ~ 377PD (E and V noted here are the RMS values averaged over time), the antenna factor is developed as: Where
* Ae = (λ2G)/4π : the antenna effective aperture
* PD is the power density in watts per unit area
* Pr is the power delivered into the load resistance presented by the receiver (normally 50 ohms)
* G: the antenna gain
* is the magnetic constant
* is the electric constant For antennas which are not defined by a physical area, such as monopoles and dipoles consisting of thin rod conductors, the effective length (units: meter) is used to measure the ratio between voltage and electric field. (en)
- Der Antennenfaktor, abgekürzt AF oder auch als K-Faktor bezeichnet, drückt das Verhältnis der an einer Empfangsantenne anstehenden elektrischen Feldstärke E und der am abgeschlossenen Antennenanschluss anliegenden elektrischen Spannung U aus und charakterisiert die Empfangseigenschaften einer elektrischen Antenne. Bei magnetischen Antennen ergibt sich ein analoger Zusammenhang zwischen der magnetischen Feldstärke H und der am abgeschlossenen Antennenanschluss anliegenden elektrischen Spannung U. Der Antennenfaktor ist dabei stark frequenzabhängig, wird in Form von Diagrammen als Verlauf des Antennenfaktors über die Frequenz beschrieben, und ist vom Typ und Aufbau der Antenne bestimmt. Der Antennenfaktor wird insbesondere im Bereich der elektrischen Messtechnik im Rahmen von EMV-Prüfungen verwendet, um von der mit einem Spektrumanalysator gemessen elektrischen Spannung auf die in der Prüfkammer vorliegende elektrische Feldstärke schließen zu können. Da Störemissionsmessungen eines zu prüfenden Gerätes in guter Näherung im Fernfeld erfolgen, kann durch die so ermittelte elektrische Feldstärke bzw. magnetischen Feldstärke direkt auf das abgestrahlte elektromagnetische Feld des zu prüfenden Gerätes geschlossen werden. (de)
|
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is foaf:primaryTopic
of | |