A Craig tube is an item of apparatus used in small-scale (up to about 100 mg) preparative and analytical chemistry, particularly for recrystallisation. It was invented by Lyman C. Craig and Otto W. Post. The apparatus has the advantages that the crystallised product is relatively dry, is free from contamination by fibres from filter paper, and can be recovered more efficiently than from a sinter funnel. Craig tubes can be made by competent glassblowers, and are also available commercially.
Attributes | Values |
---|
rdfs:label
| - Craig tube (en)
- Tubo de Craig (pt)
|
rdfs:comment
| - A Craig tube is an item of apparatus used in small-scale (up to about 100 mg) preparative and analytical chemistry, particularly for recrystallisation. It was invented by Lyman C. Craig and Otto W. Post. The apparatus has the advantages that the crystallised product is relatively dry, is free from contamination by fibres from filter paper, and can be recovered more efficiently than from a sinter funnel. Craig tubes can be made by competent glassblowers, and are also available commercially. (en)
- Um tubo de Craig é um aparelho usado em química preparativa e analítica para recristalização em microescala (até cerca de 100 mg), particularmente para recristalização. Foi inventado por Lyman C. Craig e Otto W. Post. O aparelho tem por vantagens a formação de um produto cristalizado relativamente seco, isento de contaminação por fibras de papel de filtro e que pode ser recuperado de forma mais eficiente do que a partir de um funil de sinterização. Os tubos de Craig podem ser feitos por sopradores de vidro competentes e também estão disponíveis comercialmente. (pt)
|
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
has abstract
| - A Craig tube is an item of apparatus used in small-scale (up to about 100 mg) preparative and analytical chemistry, particularly for recrystallisation. It was invented by Lyman C. Craig and Otto W. Post. A Craig tube consists of two parts. The first is a stout-walled test tube with a working volume of about 1-5 ml (say, 7-8 cm in length and 1-1.5 cm in diameter). There is a constriction towards the open end of the tube. The second is a loosely-fitting generally-cylindrical stopper, possibly with a teardrop-shaped head, of glass or of another inert material such as PTFE, which seats on the constriction. Recrystallisation is carried out in the usual manner, by dissolving the solid to be purified in a solvent and causing crystals of the solid to form. The stopper can be used to protect the solution from atmospheric contamination. The crystals are separated from the mother liquor by placing the tube and stopper – inverted – in a centrifuge tube, followed by centrifugation. The stopper allows the mother liquor to pass into the centrifuge tube but retains the crystals, which can subsequently be recrystallised again or collected. The apparatus has the advantages that the crystallised product is relatively dry, is free from contamination by fibres from filter paper, and can be recovered more efficiently than from a sinter funnel. Craig tubes can be made by competent glassblowers, and are also available commercially. (en)
- Um tubo de Craig é um aparelho usado em química preparativa e analítica para recristalização em microescala (até cerca de 100 mg), particularmente para recristalização. Foi inventado por Lyman C. Craig e Otto W. Post. Um tubo de Craig é constituído de duas partes. A primeira é um tubo de ensaio de parede espessa com um volume útil de cerca de 1–5 ml (por exemplo, 7–8 cm de comprimento e 1–1,5 cm de diâmetro). Há uma constrição em direção à extremidade aberta do tubo. A segunda parte é uma rolha geralmente cilíndrica de ajuste solto, possivelmente com uma cabeça em forma de lágrima, feita de vidro ou de outro material inerte, como PTFE, que é posta na constrição. Geralmente, a recristalização é realizada dissolvendo o sólido a ser purificado e causando a formação de cristais do sólido no solvente. A rolha pode ser usada para proteger a solução da contaminação atmosférica. Os cristais são separados do líquido colocando o tubo e a rolha — invertidos — em um tubo de centrífuga, sucedendo uma centrifugação. A rolha permite que o líquido residual passe para o tubo de centrifugação, mas retém os cristais, que podem ser recristalizados ou recolhidos posteriormente. O aparelho tem por vantagens a formação de um produto cristalizado relativamente seco, isento de contaminação por fibras de papel de filtro e que pode ser recuperado de forma mais eficiente do que a partir de um funil de sinterização. Os tubos de Craig podem ser feitos por sopradores de vidro competentes e também estão disponíveis comercialmente. (pt)
|
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage disambiguates
of | |
is foaf:primaryTopic
of | |