About: Gas reinjection     Goto   Sponge   NotDistinct   Permalink

An Entity of Type : owl:Thing, within Data Space : dbpedia.demo.openlinksw.com associated with source document(s)
QRcode icon
http://dbpedia.demo.openlinksw.com/describe/?url=http%3A%2F%2Fdbpedia.org%2Fresource%2FGas_reinjection&invfp=IFP_OFF&sas=SAME_AS_OFF

Gas reinjection is the reinjection of natural gas into an underground reservoir, typically one already containing both natural gas and crude oil, in order to increase the pressure within the reservoir and thus induce the flow of crude oil or else sequester gas that cannot be exported. This is not to be confused with gas lift, where gas is injected into the annulus of the well rather than the reservoir. After the crude has been pumped out, the natural gas is once again recovered. Since many of the wells found around the world contain heavy crude, this process increases their production. The basic difference between light crude and heavy crude is its viscosity and pumpability—the lighter the crude the easier it is to pump. Recovery of hydrocarbons in a well is generally limited to 50% (heav

AttributesValues
rdfs:label
  • Gas reinjection (en)
  • Réinjection de gaz (fr)
rdfs:comment
  • Gas reinjection is the reinjection of natural gas into an underground reservoir, typically one already containing both natural gas and crude oil, in order to increase the pressure within the reservoir and thus induce the flow of crude oil or else sequester gas that cannot be exported. This is not to be confused with gas lift, where gas is injected into the annulus of the well rather than the reservoir. After the crude has been pumped out, the natural gas is once again recovered. Since many of the wells found around the world contain heavy crude, this process increases their production. The basic difference between light crude and heavy crude is its viscosity and pumpability—the lighter the crude the easier it is to pump. Recovery of hydrocarbons in a well is generally limited to 50% (heav (en)
  • La réinjection de gaz concerne la réinjection de gaz naturel dans un souterrain, généralement dans un réservoir contenant déjà à la fois du gaz naturel et de pétrole brut, afin d'augmenter la pression dans le réservoir et ainsi augmenter le débit de pétrole brut ou encore séquestrer le gaz qui ne peut pas être exporté. Ce ne doit pas être confondu avec l’extraction par injection de gaz, où le gaz est injecté dans le du puits plutôt que le réservoir. Après que le brut ait été pompé, le gaz naturel est une fois encore récupéré. Comme bon nombre des puits découverts partout dans le monde contiennent du pétrole brut lourd, ce processus augmente leur production. (fr)
dcterms:subject
Wikipage page ID
Wikipage revision ID
Link from a Wikipage to another Wikipage
Link from a Wikipage to an external page
sameAs
dbp:wikiPageUsesTemplate
has abstract
  • Gas reinjection is the reinjection of natural gas into an underground reservoir, typically one already containing both natural gas and crude oil, in order to increase the pressure within the reservoir and thus induce the flow of crude oil or else sequester gas that cannot be exported. This is not to be confused with gas lift, where gas is injected into the annulus of the well rather than the reservoir. After the crude has been pumped out, the natural gas is once again recovered. Since many of the wells found around the world contain heavy crude, this process increases their production. The basic difference between light crude and heavy crude is its viscosity and pumpability—the lighter the crude the easier it is to pump. Recovery of hydrocarbons in a well is generally limited to 50% (heavy crudes) and 75–80% (light crudes). Recycling of natural gas or other inert gases causes the pressure to rise in the well, thus causing more gas molecules to dissolve in the oil lowering its viscosity and thereby increasing the well's output. Air is not suitable for repressuring wells because it tends to cause deterioration of the oil, thus carbon dioxide or natural gas is used to repressure the well. The term 'gas-reinjection' is also sometimes referred to as repressuring—the term being used only to imply that the pressure inside the well is being increased to aid recovery. Injection or reinjection of carbon dioxide also takes place in order to reduce the emission of CO2 into the atmosphere, a form of carbon sequestration. This has been proposed as a method to combat climate change, allowing mass storage of CO2 over a geological timescale. Reinjection of carbon dioxide in the Norwegian Sleipner gas field saves the operators 1 million Norwegian Kroners per day in national carbon taxes. (en)
  • La réinjection de gaz concerne la réinjection de gaz naturel dans un souterrain, généralement dans un réservoir contenant déjà à la fois du gaz naturel et de pétrole brut, afin d'augmenter la pression dans le réservoir et ainsi augmenter le débit de pétrole brut ou encore séquestrer le gaz qui ne peut pas être exporté. Ce ne doit pas être confondu avec l’extraction par injection de gaz, où le gaz est injecté dans le du puits plutôt que le réservoir. Après que le brut ait été pompé, le gaz naturel est une fois encore récupéré. Comme bon nombre des puits découverts partout dans le monde contiennent du pétrole brut lourd, ce processus augmente leur production. La différence fondamentale entre le et le est sa viscosité et sa capacité à être pompé, le brut léger étant plus facile à pomper. La récupération des hydrocarbures dans un puits est généralement limitée à 50 % (pour les bruts lourds) et 75-80 % (pour les bruts légers). Le recyclage du gaz naturel ou d'autres gaz inertes permet d’augmenter la pression dans le puits, provoquant la dissolution de plus de molécules de gaz dans le pétrole abaissant ainsi sa viscosité et augmentant le débit à la sortie du puits. L’air ne convient pas pour la recompression des puits parce qu'il tend à entraîner une dégradation du pétrole, le dioxyde de carbone ou le gaz naturel sont utilisés pour rétablir la pression dans les puits. Le terme «réinjection de gaz» est également parfois appelée recompression - le terme étant utilisé uniquement pour signifier que la pression à l'intérieur du puits est augmentée pour faciliter la récupération. L’injection ou la réinjection de dioxyde de carbone ont également lieu dans le but de réduire les émissions de CO2 dans l'atmosphère, et constitue une forme de séquestration du carbone. Cela fut proposé comme une méthode pour lutter contre le changement climatique, ce qui permet le stockage de masse de CO2 sur une échelle des temps géologiques. La réinjection de dioxyde de carbone dans le champ norvégien de gaz de Sleipner permet à l’exploitant d’économiser 1 000 000 couronnes norvégiennes par jour en taxes carbone. (fr)
prov:wasDerivedFrom
page length (characters) of wiki page
foaf:isPrimaryTopicOf
is Link from a Wikipage to another Wikipage of
is Wikipage redirect of
is foaf:primaryTopic of
Faceted Search & Find service v1.17_git139 as of Feb 29 2024


Alternative Linked Data Documents: ODE     Content Formats:   [cxml] [csv]     RDF   [text] [turtle] [ld+json] [rdf+json] [rdf+xml]     ODATA   [atom+xml] [odata+json]     Microdata   [microdata+json] [html]    About   
This material is Open Knowledge   W3C Semantic Web Technology [RDF Data] Valid XHTML + RDFa
OpenLink Virtuoso version 08.03.3330 as of Mar 19 2024, on Linux (x86_64-generic-linux-glibc212), Single-Server Edition (378 GB total memory, 56 GB memory in use)
Data on this page belongs to its respective rights holders.
Virtuoso Faceted Browser Copyright © 2009-2024 OpenLink Software