ISO 7637 Road vehicles -- Electrical disturbances from conduction and coupling is an international electromagnetic compatibility vehicle standard published by the International Organization for Standardization (ISO), that relates to 12 and 24 volt electrical systems. As of November 2018, four parts of ISO 7637 have been published, and one is in development (part 4):
Attributes | Values |
---|
rdfs:label
| - ISO 7637 (ca)
- ISO 7637 (en)
- ISO 7637 (zh)
|
rdfs:comment
| - ISO 7637 és una normativa internacional (creada per l'ISO) de compatibilitat electromagnètica que es refereix als requisits d'immunitat en front a interferències de RF conduïdes i acoblades aplicada a vehicles de carretera. La darrera versió de la norma es pot trobar aquí (ca)
- ISO 7637 Road vehicles -- Electrical disturbances from conduction and coupling is an international electromagnetic compatibility vehicle standard published by the International Organization for Standardization (ISO), that relates to 12 and 24 volt electrical systems. As of November 2018, four parts of ISO 7637 have been published, and one is in development (part 4): (en)
- ISO 7637标准全称为:道路车辆 -- 由传导和耦合产生的电气干扰(英語:Road vehicles -- Electrical disturbances from conduction and coupling)。该标准是国际标准化组织为汽车12V和24V供电系统设立的电磁兼容性标准。截至2018年11月,ISO 7637标准共发布了4个部分,仍有一个部分(第4部分)修订中:
* ISO 7637-1(最后修订于2015年10月)定义和一般考虑
* ISO 7637-2(最后修订于2011年3月)仅沿电源线的瞬时电传导
* ISO 7637-3(最后修订于2016年7月)沿电源线以外的其他线缆的电容性和电感性耦合产生的瞬时电传导
* ISO 7637-4 仅沿有屏蔽层的高压电源线的瞬时电传导
* ISO 7637-5(最后修订于2016年11月)强化定义和使用符合ISO 7637的脉冲发生器进行协调验证的方法 (zh)
|
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
has abstract
| - ISO 7637 és una normativa internacional (creada per l'ISO) de compatibilitat electromagnètica que es refereix als requisits d'immunitat en front a interferències de RF conduïdes i acoblades aplicada a vehicles de carretera. La darrera versió de la norma es pot trobar aquí (ca)
- ISO 7637 Road vehicles -- Electrical disturbances from conduction and coupling is an international electromagnetic compatibility vehicle standard published by the International Organization for Standardization (ISO), that relates to 12 and 24 volt electrical systems. As of November 2018, four parts of ISO 7637 have been published, and one is in development (part 4):
* ISO 7637-1 (last revised October 2015) Definitions and general considerations
* ISO 7637-2 (last revised March 2011) Electrical transient conduction along supply lines only
* ISO 7637-3 (last revised July 2016) Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
* ISO 7637-4 Electrical transient conduction along shielded high voltage supply lines only
* ISO 7637-5 (last revised November 2016) Enhanced definitions and verification methods for harmonization of pulse generators according to ISO 7637 There are several distinct electrical transient waveforms that are required from this testing to ISO 7637-2. These pulses or waveforms include very high rise or fall times often in the nanosecond and microseconds range. These transients are designed to simulate electrical occurrences in operational environments, including a load dump simulation. ISO 7637 is referenced by many vehicle manufacturer standards and individual waveforms are modified to meet specific requirements. ISO 7637 includes both immunity and emissions components of electromagnetic compatibility testing. This standard, including ISO 7637-2 places specific requirements on test equipment that can be used to replicate electrical occurrences. (en)
- ISO 7637标准全称为:道路车辆 -- 由传导和耦合产生的电气干扰(英語:Road vehicles -- Electrical disturbances from conduction and coupling)。该标准是国际标准化组织为汽车12V和24V供电系统设立的电磁兼容性标准。截至2018年11月,ISO 7637标准共发布了4个部分,仍有一个部分(第4部分)修订中:
* ISO 7637-1(最后修订于2015年10月)定义和一般考虑
* ISO 7637-2(最后修订于2011年3月)仅沿电源线的瞬时电传导
* ISO 7637-3(最后修订于2016年7月)沿电源线以外的其他线缆的电容性和电感性耦合产生的瞬时电传导
* ISO 7637-4 仅沿有屏蔽层的高压电源线的瞬时电传导
* ISO 7637-5(最后修订于2016年11月)强化定义和使用符合ISO 7637的脉冲发生器进行协调验证的方法 ISO 7637-2的测试中包含数个不同的波形。这些脉冲或者波形的上升沿和下降沿十分迅速,通常为纳秒或者微秒级。设计这些瞬态电压实验的目的在于模拟现实条件下,汽车会遇到的所有电气事故,包括抛负载情况。很多汽车制造商的设计标准参照了ISO 7637标准,并对测试波形进行修改以适应其自身需求。ISO 7637同时包括电磁兼容性测试的电磁耐受性和发射部分。所有这些标准规范了能够用来重现电气事故,进行测试的仪器设备参数要求。 (zh)
|
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is foaf:primaryTopic
of | |