Within the field of electronics Level-sensitive scan design (LSSD) is part of an integrated circuit manufacturing test process. It is a DFT scan design method which uses separate system and scan clocks to distinguish between normal and test mode. Latches are used in pairs, each has a normal data input, data output and clock for system operation. For test operation, the two latches form a master/slave pair with one scan input, one scan output and non-overlapping scan clocks A and B which are held low during system operation but cause the scan data to be latched when pulsed high during scan.
Attributes | Values |
---|
rdfs:label
| - Level-sensitive scan design (en)
|
rdfs:comment
| - Within the field of electronics Level-sensitive scan design (LSSD) is part of an integrated circuit manufacturing test process. It is a DFT scan design method which uses separate system and scan clocks to distinguish between normal and test mode. Latches are used in pairs, each has a normal data input, data output and clock for system operation. For test operation, the two latches form a master/slave pair with one scan input, one scan output and non-overlapping scan clocks A and B which are held low during system operation but cause the scan data to be latched when pulsed high during scan. (en)
|
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
has abstract
| - Within the field of electronics Level-sensitive scan design (LSSD) is part of an integrated circuit manufacturing test process. It is a DFT scan design method which uses separate system and scan clocks to distinguish between normal and test mode. Latches are used in pairs, each has a normal data input, data output and clock for system operation. For test operation, the two latches form a master/slave pair with one scan input, one scan output and non-overlapping scan clocks A and B which are held low during system operation but cause the scan data to be latched when pulsed high during scan. ____ | | Sin ----|S | A ------|> | | Q|---+--------------- Q1 D1 -----|D | | CLK1 ---|> | | |____| | ____ | | | +---|S | B -------------------|> | | Q|------ Q2 / SOut D2 ------------------|D | CLK2 ----------------|> | |____| In a single latch LSSD configuration, the second latch is used only for scan operation. Allowing it to be used as a second system latch reduces the silicon overhead. (en)
|
gold:hypernym
| |
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage redirect
of | |
is foaf:primaryTopic
of | |