rdfs:comment
| - L’orthotropie désigne des caractéristiques de symétrie d'un corps, d'une grandeur ou d'un phénomène. Ce terme est utilisé dans plusieurs domaines avec des définitions différentes. (fr)
- Een materiaal is orthotroop wanneer de materiaaleigenschappen anders zijn in twee of drie onderling loodrechte richtingen. Een voorbeeld hiervan is hout, dat langs de nerf andere eigenschappen heeft dan dwars op de nerf. Orthotropie is daarmee een bijzondere vorm van anisotropie. (nl)
- Ортотропи́я (от греч. órthos — прямой и tróроs — направление) — неодинаковость физических (физико-химических) свойств среды (например, прочности, упругости, электропроводности, теплопроводности и др.) по двум (трём) взаимно перпендикулярным направлениям, внутри этой среды. Ортотропия является частным случаем анизотропии. (ru)
- Die Orthotropie (von griechisch ορθός orthos „korrekt, senkrecht, gerade stehend“ und τρόπος tropos „Weg, Art und Weise“) ist eine spezielle Art der Richtungsabhängigkeit eines Werkstoffs/Materials. Orthotrope Materialien wie im Bild haben die folgenden Eigenschaften: 1.
* Das Kraft-Verformungs-Verhalten ändert sich nicht, wenn das Material um 180 Grad um die Orthotropieachsen gedreht wird. 2.
* Im Bezugssystem parallel zu den Orthotropieachsen gibt es keine Kopplung zwischen Normaldehnungen und Schubverzerrungen. (de)
- Un material ortótropico tiene dos o tres ejes ortogonales entre sí, de doble simetría rotacional, de forma que sus propiedades mecánicas son, en general, diferentes en las direcciones de cada uno de esos ejes. Los materiales ortótropos son entonces anisótropos, ya que sus propiedades dependen de la dirección en que son medidas. En cambio, un material isótropo tiene las mismas propiedades en todas las direcciones. Los materiales transversalmente isótropos son un subtipo de material ortótropo. Un material ortótropo (lineal y homogéneo) requiere en general especificar 9 constantes elásticas, mientras que un material transversalmente ortótropo sólo requiere 5. (es)
- In material science and solid mechanics, orthotropic materials have material properties at a particular point which differ along three orthogonal axes, where each axis has twofold rotational symmetry. These directional differences in strength can be quantified with Hankinson's equation. They are a subset of anisotropic materials, because their properties change when measured from different directions. Because the preferred coordinate system is cylindrical-polar, this type of orthotropy is also called polar orthotropy. (en)
- Ortotropia (z gr. ortho – proste, trópos – zwrot, obrót) – zjawisko występujące w przypadku, gdy własności materiałowe ciała zmieniają się w kierunkach prostopadłych, nie pokrywających się z osiami głównymi przyjętego układu współrzędnych. Ma to miejsce np. przy rozważaniu konstrukcji wykonanych z żywic zbrojonych włóknem szklanym lub węglowym, jak również przy rozważaniach mikrostruktury niektórych ciał ceramicznych lub metalicznych. lub jej odwrotność w notacji inżynierskiej jako gdzie: (pl)
- У матеріалознавстві і механіці твердого тіла, ортотропні матеріали мають властивості, що різняться уздовж трьох взаємно-ортогональних осей обертової симетрії. Вони є підмножиною анізотропічних матеріалів, оскільки їх властивості змінюються зі зміною напрямку. У мінералогії ортотропія – явище, яке спостерігається при рості мінералів, коли вони намагаються розвиватись у напрямі, перпендикулярному до площини чи лінії їх зародження. Від давньогрецькиих латинізованих коренів ortho- – прямий і -tropia – поворот. (uk)
|