A sprue is the vertical passage through which liquid material is introduced into a mold and it is a large diameter channel through which the material enters the mold. It connects the pouring basin to the runner. In many cases it controls the flow of material into the mold. During casting or molding, the material in the sprue will solidify and need to be removed from the finished part. It is usually tapered downwards to minimize turbulence and formation of air bubbles.
Attributes | Values |
---|
rdf:type
| |
rdfs:label
| - Anguss (de)
- Sprue (manufacturing) (en)
- Литниковая система (ru)
- Ливникова система (uk)
|
rdfs:comment
| - A sprue is the vertical passage through which liquid material is introduced into a mold and it is a large diameter channel through which the material enters the mold. It connects the pouring basin to the runner. In many cases it controls the flow of material into the mold. During casting or molding, the material in the sprue will solidify and need to be removed from the finished part. It is usually tapered downwards to minimize turbulence and formation of air bubbles. (en)
- Ливнико́ва систе́ма або литнико́ва систе́ма — система каналів та елементів ливарної форми для підведення розплавленого матеріалу в порожнину форми (прес-форми при литті під тиском), забезпечення її заповнення та живлення виливка у процесі тверднення. Після затверднення розплаву металу ливникова система обрубується і йде на переплавлення. (uk)
- Der Anguss ist beim Sandguss und beim Spritzgießen von Metall und Kunststoff der Teil des Spritzlings, welcher nicht zum gehört. Er entsteht durch die in den Zuführungskanälen zur Gießform erstarrte Schmelze und sollte möglichst wenig Gewicht haben, um Abfall zu vermeiden. Bei der gleichzeitigen Herstellung mehrerer Spritzlinge muss das Kanal- bzw. Angusssystem so gestaltet sein, dass die Formteile gleichzeitig und gleichmäßig mit einer Schmelze gleichen Druckes und gleicher Temperatur befüllt werden. (de)
- Литниковая система, Литниковая питающая система — система каналов и полостей в форме, через которые жидкий расплавленный материал -расплав (металл или пластик) подается в полость литьевой формы или пресс-формы для литья под давлением. Элементы литниковой системы можно подразделить на подводящие и питающие. (ru)
|
foaf:depiction
| |
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
thumbnail
| |
has abstract
| - Der Anguss ist beim Sandguss und beim Spritzgießen von Metall und Kunststoff der Teil des Spritzlings, welcher nicht zum gehört. Er entsteht durch die in den Zuführungskanälen zur Gießform erstarrte Schmelze und sollte möglichst wenig Gewicht haben, um Abfall zu vermeiden. Bei der gleichzeitigen Herstellung mehrerer Spritzlinge muss das Kanal- bzw. Angusssystem so gestaltet sein, dass die Formteile gleichzeitig und gleichmäßig mit einer Schmelze gleichen Druckes und gleicher Temperatur befüllt werden. Die Angüsse werden meist in Handarbeit durch Abschlagen oder Scheren entfernt und verursachen einen nicht unerheblichen Teil der Kosten, da der Rest des Gießprozesses automatisiert werden kann. Zu beachten ist, dass der Anguss ohne teuere Nacharbeit immer eine kleine Fehlstelle in der Oberfläche hinterlässt.Angüsse von Thermoplast-Spritzgießteilen des Hobby-Modellbaus werden häufig an den Teilen belassen und müssen vom Anwender entfernt werden. Dient das Material im Anguss auch dem Ausgleich der Schwindung, so spricht man auch von einem Speiser. (de)
- A sprue is the vertical passage through which liquid material is introduced into a mold and it is a large diameter channel through which the material enters the mold. It connects the pouring basin to the runner. In many cases it controls the flow of material into the mold. During casting or molding, the material in the sprue will solidify and need to be removed from the finished part. It is usually tapered downwards to minimize turbulence and formation of air bubbles. (en)
- Ливнико́ва систе́ма або литнико́ва систе́ма — система каналів та елементів ливарної форми для підведення розплавленого матеріалу в порожнину форми (прес-форми при литті під тиском), забезпечення її заповнення та живлення виливка у процесі тверднення. Після затверднення розплаву металу ливникова система обрубується і йде на переплавлення. (uk)
- Литниковая система, Литниковая питающая система — система каналов и полостей в форме, через которые жидкий расплавленный материал -расплав (металл или пластик) подается в полость литьевой формы или пресс-формы для литья под давлением. Элементы литниковой системы можно подразделить на подводящие и питающие. Литниковая система в литьевой форме состоит из воронки или литниковой чаши, стояка, коллектора или , и выпора. В зависимости от места подвода расплава к отливке относительно поверхности разъема формы: верхняя литниковая система, нижняя (сифонная), боковая (по разъему) и ярусная. После затвердевания расплава металла литниковая система обрубается и идёт на переплав. В пресс-форме для литья пластмасс под давлением литниковая система состоит из центрального, разводящего и впускных литников. Она охлаждается в каждом цикле литья и застывает вместе с деталью в холодноканальной пресс-форме либо постоянно поддерживает пластик в расплавленном состоянии в горячеканальной. (ru)
|
gold:hypernym
| |
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is rdfs:seeAlso
of | |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage redirect
of | |
is Wikipage disambiguates
of | |
is foaf:primaryTopic
of | |