In telecommunications, a transverse redundancy check (TRC) or vertical redundancy check is a redundancy check for synchronized parallel bits applied once per bit time, across the bit streams. This requires additional parallel channels for the check bit or bits. The term usually applies to a single parity bit, although it could also be used to refer to a larger Hamming code. An example of a TRC is the parity written to the 9th track of a 9 track tape.
Attributes | Values |
---|
rdfs:label
| - Vertikale Redundanzprüfung (de)
- Transverse redundancy check (en)
|
rdfs:comment
| - Die vertikale Redundanzprüfung (englisch vertical redundancy check, daher oft VRC oder auch Querparitätsprüfung) ist ein Verfahren zur Fehlererkennung mittels zu jedem Zeichen zusätzlich übertragener Redundanzinformation. Eine sehr verbreitete Methode ist das Übertragen eines Paritätsbit (auch Parity-Bit genannt) bei digitaler Datenübertragung. (de)
- In telecommunications, a transverse redundancy check (TRC) or vertical redundancy check is a redundancy check for synchronized parallel bits applied once per bit time, across the bit streams. This requires additional parallel channels for the check bit or bits. The term usually applies to a single parity bit, although it could also be used to refer to a larger Hamming code. An example of a TRC is the parity written to the 9th track of a 9 track tape. (en)
|
dcterms:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
has abstract
| - Die vertikale Redundanzprüfung (englisch vertical redundancy check, daher oft VRC oder auch Querparitätsprüfung) ist ein Verfahren zur Fehlererkennung mittels zu jedem Zeichen zusätzlich übertragener Redundanzinformation. Eine sehr verbreitete Methode ist das Übertragen eines Paritätsbit (auch Parity-Bit genannt) bei digitaler Datenübertragung. (de)
- In telecommunications, a transverse redundancy check (TRC) or vertical redundancy check is a redundancy check for synchronized parallel bits applied once per bit time, across the bit streams. This requires additional parallel channels for the check bit or bits. The term usually applies to a single parity bit, although it could also be used to refer to a larger Hamming code. The adjective "transverse" is most often used when it is used in combination with additional error control coding, such as a longitudinal redundancy check. Although parity alone can only detect and not correct errors, it can be part of a system for correcting errors. An example of a TRC is the parity written to the 9th track of a 9 track tape. (en)
|
gold:hypernym
| |
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage redirect
of | |
is foaf:primaryTopic
of | |