A gin pole is a supported pole that uses a pulley or block and tackle on its upper end to lift loads. The lower end is braced or set in a shallow hole and positioned so the upper end lies above the object to be lifted. The pole (also known as a mast, boom, or spar) is secured with three or more guy-wires. These are manipulated to move the load laterally, with up and down controlled by the pulley or block. In tower construction, a gin pole can also be “jumped” up the completed sections of a tower to lift the higher sections into place.
Attributes | Values |
---|
rdf:type
| |
rdfs:label
| |
rdfs:comment
| - A gin pole is a supported pole that uses a pulley or block and tackle on its upper end to lift loads. The lower end is braced or set in a shallow hole and positioned so the upper end lies above the object to be lifted. The pole (also known as a mast, boom, or spar) is secured with three or more guy-wires. These are manipulated to move the load laterally, with up and down controlled by the pulley or block. In tower construction, a gin pole can also be “jumped” up the completed sections of a tower to lift the higher sections into place. (en)
|
foaf:depiction
| |
dct:subject
| |
Wikipage page ID
| |
Wikipage revision ID
| |
Link from a Wikipage to another Wikipage
| |
Link from a Wikipage to an external page
| |
sameAs
| |
dbp:wikiPageUsesTemplate
| |
thumbnail
| |
has abstract
| - A gin pole is a supported pole that uses a pulley or block and tackle on its upper end to lift loads. The lower end is braced or set in a shallow hole and positioned so the upper end lies above the object to be lifted. The pole (also known as a mast, boom, or spar) is secured with three or more guy-wires. These are manipulated to move the load laterally, with up and down controlled by the pulley or block. In tower construction, a gin pole can also be “jumped” up the completed sections of a tower to lift the higher sections into place. The gin pole is derived from a gyn, and considered a form of derrick, called a standing derrick or pole derrick, distinguished from sheers (or shear legs) by having a single boom rather than a two-legged one. Gin poles are also used to raise loads above structures too tall to reach with a crane, such as placing an antenna on top of a tower/steeple, and to lift segments of a tower on top of one-another during erection. When used to create a segmented tower, the gin pole can be detached, raised, and re-attached to the just-completed segment in order to lift the next. This process of jumping is repeated until the topmost portion of the tower is completed. They can also hold a person if strong enough (thus opening stage uses, such as in magic shows). Gin poles are mounted on trucks as a primitive form of mobile crane, used for lifting and relocating loads, and salvage operations in lieu of a more sophisticated wrecker. (en)
|
gold:hypernym
| |
prov:wasDerivedFrom
| |
page length (characters) of wiki page
| |
foaf:isPrimaryTopicOf
| |
is Link from a Wikipage to another Wikipage
of | |
is Wikipage redirect
of | |
is Wikipage disambiguates
of | |
is foaf:primaryTopic
of | |