In local telephone networks, a loop management system (LMS) is a kind or a part of network management system intended to maximize local loop control. Sometimes it is referred to as local loop management (LLM) or copper loop management (CLM). Although local loop unbundling is a standard process for an incumbent (ILEC), issues remain to be solved in the local loop management process. For a CLEC which borrows lines from ILEC for DSL services provisioning process, a local loop is the most critical (and the most weak) point because of reduced management of this vital part of the network.
| Attributes | Values |
|---|
| rdfs:label
| - Automatische Schaltmatrix (de)
- Loop management system (en)
|
| rdfs:comment
| - Automatische Schaltmatrix, auch automatischer Schaltverteiler, Loop Management System (LMS), automated distribution frame oder automated main distribution frame, ist eine technische Lösung zur Schaltung von Kupferdoppeladern in der Telekommunikationsinfrastruktur. Traditionell werden die Verbindungen (n Eingänge auf m Ausgänge) von Kupferdoppeladern von Technikern vor Ort manuell mit einem Schaltdraht (2 verdrillte Leitungen) im Bedarfsfall geschaltet (rangiert) bzw. aufgelöst. (de)
- In local telephone networks, a loop management system (LMS) is a kind or a part of network management system intended to maximize local loop control. Sometimes it is referred to as local loop management (LLM) or copper loop management (CLM). Although local loop unbundling is a standard process for an incumbent (ILEC), issues remain to be solved in the local loop management process. For a CLEC which borrows lines from ILEC for DSL services provisioning process, a local loop is the most critical (and the most weak) point because of reduced management of this vital part of the network. (en)
|
| dcterms:subject
| |
| Wikipage page ID
| |
| Wikipage revision ID
| |
| Link from a Wikipage to another Wikipage
| |
| sameAs
| |
| dbp:wikiPageUsesTemplate
| |
| has abstract
| - Automatische Schaltmatrix, auch automatischer Schaltverteiler, Loop Management System (LMS), automated distribution frame oder automated main distribution frame, ist eine technische Lösung zur Schaltung von Kupferdoppeladern in der Telekommunikationsinfrastruktur. Traditionell werden die Verbindungen (n Eingänge auf m Ausgänge) von Kupferdoppeladern von Technikern vor Ort manuell mit einem Schaltdraht (2 verdrillte Leitungen) im Bedarfsfall geschaltet (rangiert) bzw. aufgelöst. Die automatische Schaltmatrix erlaubt, nach einer einmaligen initialen Verdrahtung aller Ein- und Ausgänge, das ferngesteuerte Schalten bzw. Auflösen der Verbindungen. Die Vorteile der automatischen Schaltmatrix sind reduzierter Zeitaufwand, reduzierte Fehlerquellen in der Ausführung und Dokumentation, Senkung der Betriebsmittelkosten und Personaleinsparung. Feldversuche wurden erfolgreich abgeschlossen, jedoch fand eine breite industrielle Einführung nicht statt (Stand: 2009) (de)
- In local telephone networks, a loop management system (LMS) is a kind or a part of network management system intended to maximize local loop control. Sometimes it is referred to as local loop management (LLM) or copper loop management (CLM). Although local loop unbundling is a standard process for an incumbent (ILEC), issues remain to be solved in the local loop management process. For a CLEC which borrows lines from ILEC for DSL services provisioning process, a local loop is the most critical (and the most weak) point because of reduced management of this vital part of the network. During the provisioning process, a CLEC can request from its serving ILEC, a new cross-connect. By agreement ILEC must fulfill this request but it's almost impossible to immediately learn a local loop's quality or monitor its activity in real time. Such steps are sometimes mandatory for loop pretesting and qualification in order to validate its good (or bad) condition. Furthermore, testing and validation steps are vital in troubleshooting process. LMS, sometimes implemented as a part of a major network management system, views the local loop as an active network element. It speeds pre-qualification and reduces fault correction time. A complete LMS has software and hardware components. The latter is usually a switch fabric connected both to all required lines and line equipment at either side of a line. The functionality is similar to one performed by a main distribution frame or any other distribution frame, so sometimes is referred to as automated main distribution frame. A software component implies implementing management operations.
* v
* t
* e (en)
|
| prov:wasDerivedFrom
| |
| page length (characters) of wiki page
| |
| foaf:isPrimaryTopicOf
| |
| is Link from a Wikipage to another Wikipage
of | |
| is Wikipage redirect
of | |
| is foaf:primaryTopic
of | |
![[RDF Data]](/fct/images/sw-rdf-blue.png)
![[cxml]](/fct/images/cxml_doc.png)
![[csv]](/fct/images/csv_doc.png)
![[text]](/fct/images/ntriples_doc.png)
![[turtle]](/fct/images/n3turtle_doc.png)
![[ld+json]](/fct/images/jsonld_doc.png)
![[rdf+json]](/fct/images/json_doc.png)
![[rdf+xml]](/fct/images/xml_doc.png)
![[atom+xml]](/fct/images/atom_doc.png)
![[html]](/fct/images/html_doc.png)