An SS7 point code is similar to an IP address in an IP network. It is a unique address for a node (Signaling Point, or SP), used in MTP layer 3 to identify the destination of a message signal unit (MSU). In such a message you will find an OPC (Originating Point Code) and a DPC (Destination Point Code); sometimes documents also refer to it as a signaling point code. Depending on the network, a point code can be 24 bits (North America, China), 16 bits (Japan), or 14 bits (ITU standard, International SS7 network and most countries) in length.
| Attributes | Values |
|---|
| rdfs:label
| - Kód signalizačního bodu (cs)
- Point code (en)
- Код сигнальной точки (ru)
- 点码 (zh)
|
| rdfs:comment
| - Kód signalizačního bodu (Point Code (PC), Signalling Point Code (SPC)), je adresa signalizačního bodu používaná protokolem Message Transfer Part level 3 (MTP-3) v síti SS7. PC může být použit i v adresách protokolu Signalling Connection Control Part (SCCP). (cs)
- Код сигнальной точки (англ. Signal Point Code (SPC)) сигнальной системы 7 (SS7, ОКС-7) — это уникальный (в домашней сети) адрес узла, используемый на третьем уровне MTP (маршрутизация) в телекоммуникационных ОКС-7 сетях для идентификации отправителя/получателя MSU (англ. Message Signalling Unit, сигнального сообщения). Часто код сигнальной точки (SPC) различают на код точки назначения (Destination Point Code - DPC) и код точки отправления (Origination Point Code - OPC), иногда используется ISPC (International Signaling Point Code). (ru)
- 点编码（Point code）在七号信令系统中类似于中的IP地址。这是一个在MTP第3层中用于对（MSU）的目标进行识别的唯一地址节点（，Signaling Point或SP）。 在这个信息中，你会发现一个（Originating Point Code，OPC）和一个（Destination Point Code，DPC）;有时文件还提到它作为一个信令点编码。现有网络上，一个点代码可以是24位（北美，中国），16位（日本），或14位（ITU标准，国际SS7网络和大多数国家）的长度。 ANSI点编码使用24位，大多是在8-8-8格式。 ITU点编码使用14位，均为在3-8-3格式。 14位点编码为可写模式。最常见的格式是十进制数，十六进制数，或3-8-3的格式（3个最重要的位，中间8位，3个最低有效位）。 24位点编码为十进制，十六进制或8-8-8格式任选其一。 (zh)
- An SS7 point code is similar to an IP address in an IP network. It is a unique address for a node (Signaling Point, or SP), used in MTP layer 3 to identify the destination of a message signal unit (MSU). In such a message you will find an OPC (Originating Point Code) and a DPC (Destination Point Code); sometimes documents also refer to it as a signaling point code. Depending on the network, a point code can be 24 bits (North America, China), 16 bits (Japan), or 14 bits (ITU standard, International SS7 network and most countries) in length. (en)
|
| dct:subject
| |
| Wikipage page ID
| |
| Wikipage revision ID
| |
| Link from a Wikipage to another Wikipage
| |
| Link from a Wikipage to an external page
| |
| sameAs
| |
| dbp:wikiPageUsesTemplate
| |
| has abstract
| - Kód signalizačního bodu (Point Code (PC), Signalling Point Code (SPC)), je adresa signalizačního bodu používaná protokolem Message Transfer Part level 3 (MTP-3) v síti SS7. PC může být použit i v adresách protokolu Signalling Connection Control Part (SCCP). (cs)
- An SS7 point code is similar to an IP address in an IP network. It is a unique address for a node (Signaling Point, or SP), used in MTP layer 3 to identify the destination of a message signal unit (MSU). In such a message you will find an OPC (Originating Point Code) and a DPC (Destination Point Code); sometimes documents also refer to it as a signaling point code. Depending on the network, a point code can be 24 bits (North America, China), 16 bits (Japan), or 14 bits (ITU standard, International SS7 network and most countries) in length. ANSI point codes use 24 bits, mostly in 8-8-8 format.ITU point codes use 14 bits and are written in 3-8-3 format. Fourteen bit point codes can be written in a number of formats. The most common formats are decimal number, hexadecimal number, or 3-8-3 format (3 most significant bits, 8 middle bits, 3 least significant bits). Twenty-four bit point codes may be written in decimal, hexadecimal, or 8-8-8 format. (en)
- Код сигнальной точки (англ. Signal Point Code (SPC)) сигнальной системы 7 (SS7, ОКС-7) — это уникальный (в домашней сети) адрес узла, используемый на третьем уровне MTP (маршрутизация) в телекоммуникационных ОКС-7 сетях для идентификации отправителя/получателя MSU (англ. Message Signalling Unit, сигнального сообщения). Часто код сигнальной точки (SPC) различают на код точки назначения (Destination Point Code - DPC) и код точки отправления (Origination Point Code - OPC), иногда используется ISPC (International Signaling Point Code). (ru)
- 点编码（Point code）在七号信令系统中类似于中的IP地址。这是一个在MTP第3层中用于对（MSU）的目标进行识别的唯一地址节点（，Signaling Point或SP）。 在这个信息中，你会发现一个（Originating Point Code，OPC）和一个（Destination Point Code，DPC）;有时文件还提到它作为一个信令点编码。现有网络上，一个点代码可以是24位（北美，中国），16位（日本），或14位（ITU标准，国际SS7网络和大多数国家）的长度。 ANSI点编码使用24位，大多是在8-8-8格式。 ITU点编码使用14位，均为在3-8-3格式。 14位点编码为可写模式。最常见的格式是十进制数，十六进制数，或3-8-3的格式（3个最重要的位，中间8位，3个最低有效位）。 24位点编码为十进制，十六进制或8-8-8格式任选其一。 (zh)
|
| prov:wasDerivedFrom
| |
| page length (characters) of wiki page
| |
| foaf:isPrimaryTopicOf
| |
| is differentFrom
of | |
| is Link from a Wikipage to another Wikipage
of | |
| is Wikipage redirect
of | |
| is foaf:primaryTopic
of | |
![[RDF Data]](/fct/images/sw-rdf-blue.png)
![[cxml]](/fct/images/cxml_doc.png)
![[csv]](/fct/images/csv_doc.png)
![[text]](/fct/images/ntriples_doc.png)
![[turtle]](/fct/images/n3turtle_doc.png)
![[ld+json]](/fct/images/jsonld_doc.png)
![[rdf+json]](/fct/images/json_doc.png)
![[rdf+xml]](/fct/images/xml_doc.png)
![[atom+xml]](/fct/images/atom_doc.png)
![[html]](/fct/images/html_doc.png)